[Geotechnical and Geological Engineering and Rock mechanics]

• Effect of Input Wave on Subgrade Reaction of Pile in Liquefied Soil

• Nonlinear Characteristics of Horizontal Subgrade Reaction of Pile in Liquefied Soil Based on Shaking Table Test

• Surface Soil Stabilization by Lattice-Frame-Reinforced Sheet for Very Soft Ground

• Development of Construction Methods for High-Density Bentonite Barriers Using Premixed Spraying (Part 1)
  -Laboratory Tests on Methods of Spraying Roughly Crushed Bentonite and Investigation of Mixing Methods-

• Development of a Measuring System to Verify Performance Assessment for a High-Level Radioactive Waste Repository
  -In Situ Borehole Test to Verify Performance Using Manufactured Prototype-

• Fundamental Study on an Evaluation Method for the Geological Environment with Spatially Heterogeneous Characteristics

• Experimental Study on Change in Equilibrium Earth Pressure Caused by Overburden Pressure Reduction

• Study on Structural Performance of Ultra High Strength Fiber Reinforced Concrete

• High-Precision Decomposition of Incident and Reflected Waves on Two-Dimensional Irregular Wave Measurement

• Bending Shear Behavior of Shear-Yield-Precedence Short-Span Beams

• A Discrete Mechanical Model Composed of Springs and Rigid Elements of Laminated Rubber Bearings

• Shaking Table Tests on Ultimate Behavior of Slender Base-Isolated Buildings Supported by Laminated Rubber Bearings

• Nonlinear Finite-Element Analysis of Reinforced-Concrete Structures under Cyclic Loading

• Measurement of Concrete Strength Using the Emission Intensity Ratio between Ca (II) 396.8 nm and Ca (I) 422.6 nm in an Nd:YAG-Laser-Induced Plasma

• Experiments on the Producibility of Ultra High Strength Fiber Reinforced Concrete

• Retrofit Application to Irrigation Canals of a Directly Sprayed Engineered Cementitious Composite

• Durability of Ultra High Strength Fiber Reinforced Concrete

• New Methods of Repairing Jetty Structures Using High-Durability Carbon-Fiber-Reinforced Concrete

• Development of High-Density Bentonite Barriers by Means of Spraying Methods (Part 2)
  -Investigation of Field Conditions-

• Characteristics of and Design Method for New Cracking-Inducing Contraction Joints for Structural Walls

• Prediction of Steel Corrosion Rate in Concrete Using Monitoring Data

• Study on Reduction of Building Services Running Costs: Energy and Maintenance

• A Study on Hydrogen Storage and Supply Using an Organic Hydride

• Estimation of Ground Response Reduction Characteristics of Soilbags on the Ground by Means of Vibration Tests Using an Exciter

• Design Method for Environmental Controls in Large-Scale Greenhouses

• 3D Sound Reproduction Using OPSODIS

• In Situ CVOC Remediation Method Involving Injection of Anaerobic-Biodegradation-Facilitating Compounds

• Development of Runoff Simulation System in Mountainous Areas

• High-Efficiency Methane Fermentation Using a Mixture of Garbage and Other Waste Biomass

• Development of a Two-Stage Hydrogen-Methane Fermentation Process Using Organic Waste

• Development of Quick-Hardening Repair Mortar Using By-Products

• Large Eddy Simulation of Turbulent Flows around Cylinder-type Structures in Overset Grids

• Transfer Function of the Strong Ground Motions Inferred from the Coherent Components in Vertical Array Observation Records

• Relationship between Scale Parameter and Gust Factors for Assessment Criterion of Wind Environment

• Gust Factor and Assessment Criterion for Wind Environment According to the Wind Engineering Institute

• Development of a Structural Health Monitoring System Using a Novel Optical Fiber Sensor

• Indoor Navigation and Workpiece Outline Recognition for Autonomous Construction Machinery

[Materials and Construction Systems]

• Method of Evaluating Performance of Placing Concrete to Eliminate Initial Defects

[Environmental Engineering]

• Revegetation Using Excavated Soil on Site in an Airport Landing Area