[Geotechnical and Geological Engineering and Rock mechanics]

• Development of Horizontally Skirted Foundation
  -Basic Concept for Utilization of Artificially Induced Suction and Its Applicability-

• Evaluation of Seismic Performance of Tunnels

• New Grouting Method with Dynamic Pressure
  -DynaPress Grouting Method-

• Partial Solidification Method of the Arch Formation Effect

• Application of the MBC Analysis Model for Jointed Rock Masses

• Rotational Properties of Semi-Rigid Connection of a Pile Head

• Strength Properties of Fiber-Reinforced Soil Cement Column Using PVA Short Fiber

• System Identification of a Partly Embedded Reactor Building Under Fixed-Based Condition

• A Real-scale Model Test on Constructability of Railway Bridges with Composite Girders Converted from Temporary Girders

• Mechanical Anchorage Using an Anchor Plate For Beam/Column Joints of R/C Frames
  Part 2: Mechanical Anchorage Method Using Frictional Connection

• Development of a Damper with Polyvinyl Alcohol-Engineered Cementitious Composites

• Seismic Performance of RC Frame Structure Using Ultra High Strength Concrete

• Analytical Study on the Deformation Capacity of Steel Plate under Ductile Fracture

• Experimental Study on 'Non-Anchor' Reinforced Concrete Shear Wall for Seismic Retrofit

• Volume Measurement System of Earth-and-Sand Loaded on a Dump Truck

• Development of Ultra High Strength Concrete to Controlling Autogenous Shrinkage

• Development and Construction of a New Type of Seawall

• Kajima Water-proof System for Reinforced Concrete Slab in Road Bridges

• Sacrificial Anode Materials for the Purpose of Preventing Macro-Cell Corrosion

• Prediction of Degradation for RC Structures in Marine Environment

• Precast Concrete Construction Costs
  -Analysis on Cost of Manufacturing Precast Concrete Components-

• Investigation for installing Kajima No-Anchor Wall in Seismic Strengthening Construction

• Building Thermal Insulation and Preventing Dew Condensation in Buildings Part 2

• Museum Environmental Engineering Part 2

• Effect of Acoustical Damping with an Absorptive Layer in the Cavity to Reduce the Structure-borne Sound Radiation

• Estimation Method of Direct and Diffuse Solar Irradiance from Measured Global Horizontal Solar Irradiance based on Long-term Observation Data

• Development of Super-Sensitivity Detector Tube for Very Small Quantity of Ammonia and Its Application to Clean Room and Museum

• Air Sparging with Horizontal Wells

• Evaluation and Monitoring of the Remediation Effect of the Pump-and-Treat Method in DNAPL Contaminated Sites

• Environmental Assessment System for Green Spaces

• Integration of Building and Urban Systems Promoting Waste Management
  Part 2: Analysis of Public Consciousness to Promote Household and Regional Waste Management

• Integration of Building and Urban Systems Promoting Waste Management
  Part 3: Analysis of Specific Environmental Load of Waste Disposal

• Gust Factor for Assessment Criteria of Wind Environment

• System Identification of a Building Alone with the Effect of Dynamic Soil-structure Interaction Eliminated

• Dynamic Characteristic Estimation of Buildings During Microtremors Considering Rocking Motion of the Base

• Site Amplification Factors of K-NET Sites in Pacific Coast Region of Southern Tohoku District, Japan

• Study on Strong Wind Hazard Analysis For Buildings

• Development of a Network with High Real-time Performance and Its Application to Robot Control

• Theoretical Analysis of Radio Wave Leakage from Gaps between Shielding-concrete Panels

• Reduction of Incident Radiation and Heat Release Rate in a Tunnel with Water Screen

• A Study on Decision-Making Process to Earthquake Disaster Prevention Investment Based on Risk Assessment

[Materials and Construction Systems]

• Outline and Application of Building Erection Planning System

[Building Environment Engineering]

• Mutual Agreement Formation of Building Renovation Plans by Function Evaluation
  -Renovation Menu Presentation System-