Theses
[Geotechnical and Geological Engineering and Rock mechanics]
- Earth Pressure of the Octopus Shield Tunneling Method
- An Integrated Assessment System for Solute Transport Properties in Coastal Sedimentary Rock
- Evaluation of a Supporting Mechanism for Forepiling
- Control of Concrete Removing Depth Using a Collision Water Jet
- Development of a Friction and Lateral Stress Measurement Cone
[Structural Engineerring and Aseismic Technology]
- Full Scale Tests of a New Composite Segment (DRC Segment) for Shield Tunnels
- Evaluation of Dynamic Response Analysis of Cable-stayed Bridges Based on Earthquake Observation in Tokachi Bridge
- Shear Capacity of Concrete Joints Processed by the Water Jet Method
- Study on Seismic Performance of the Shikari Ohashi Bridge based on Vibration Tests and Dynamic Response Analyses Using Earthquake Observation Records
- Load Carrying Behavior at the Anchorage Zone of Prestressed Concrete Using High Performance Lightweight Concrete
- Development of an Added Shear Wall without a Post-Installed Anchor
- Restoring the Force Characteristics of Reinforced Concrete Broad Columns
- Seismic Capacity of Unembedded Types of SRC Column Bases
- Bending Shear Test on High-Strength RC Column Using 100 N/mm2 Strength Concrete
- Shear and Flexural Performance of Reinforced Beams Using High Performance Fiber-Reinforced Cement Composite
- Dynamic Loading Test for Typhoon Resistance of an Isolator at a Base-Isolated Tall Building
- A Study on Countermeasures against Wind-Induced Cable Vibrations in Cable-Stayed Bridge by Changing Vibration Modes
- Self-Regulating, Semi-Active Oil Damper to Maximize Energy Dissipation Capacity
[Materials and Construction Systems]
- Assessment System for the Deterioration of Concrete Structures Using the Mix Proportion and Regional Meteorological Data
- Evaluation of Thermal Stresses of Asphalt Mixtures (Part 2)
- Preventing exfoliation by using organic short-fiber reinforced concrete
- Pore Structures in Concrete by Penetration Tests Using Macromolecule Solutions
- Experiment on the Application Method of Mixed Silane and Siloxane Water Repellent Agent
- Development of Super Light-Weight Concrete for Structures (Part 3) Compositional Effect between Super Lightweight Concrete and Steel Beams
- Economic Assessments of the Precast Concrete Construction Method and Traditional Method
- Chemical Transformation of Aggregates to Prevent Alkali-Silica Reactions
[Building Environment Engineering]
- Field Study and Countermeasures on Floor Impact Noise from Bathrooms
- Effect of an Interior-Panel on Structure-Borne Sound Radiation
- Museum Environmental Engineering
- Development of an Ultra Clean Room for Air-Quality Testing
- Optimal Source Distribution for Binaural Synthesis over Loudspeakers
- BIPV Products in Japan
[Environmental Engineering]
- Enhancement Remediation Method for Volatile Organic Compounds in an Unsaturated Zone
- A Remediation Method for Contaminated Soil and Groundwater Using a Water-jet
- A Designing Method for In-situ Bioremediation of TCE Contaminated Groundwater with Cometabolic Degradation
- Feasibility of Live Seaweed on an Asphalt Mat
- Development of Ecological Porous Concrete
- Numerical Simulation Scheme for the Atmospheric Boundary Layer by a Nonhydrostatic Model
- LNAPL Migration in Hetrogeneous and Unsaturated Layered Soils
- Performance of Concrete with an Electromagnetic Shield (Part1)
[Sustainable Construction Systems]
- Integration of Building and Urban Systems Promoting Waste Management Part 1
[Earthquake and Wind Engineering]
- Models of Boundary at Ground Surface and Cloud to Estimate the Planetary Boundary Layer
- Effect of Micro-Topography on Design Wind Velocity
- Model Test on Pressure Variation Acting on Tunnel Reinforcement Structure Caused by Trains Entering a Tunnel
- Pile Response Characteristics of Liquefied Soil Layers in Shaking Table Tests of a Large-Scale Laminar Shear Box
- Dynamic Behavior during Earthquake of an Abutment with Light-Weight Soil for Backfill
- Effect of Seismometer Foundation on Strong Motion Records
- Wind Resistant Design of a Semi-Rigid Hanging Roof Structure Composed of Glulams and Steel Plate
[Mechatronics Engineering]
- Simulation of Magnetic-Shield Characteristics of a Room with Highly-Permeable Films (Part1)
- Theory of Attenuator for High Voltage in a Large Crane Near a Broadcasting Antenna
[Urban Planning and Disaster Prevention Engineering]
- PV Modules for Building's Exterior Walls that have improved Fire-proof and Fire-resistant properties
- Heat Flux to a Surface Wall above the Fire Floor Level
Reports
[Materials and Construction Systems]
- Application of High Performance Lightweight Aggregate Concrete for Construction of Pre-Stressed Concrete Box Girder Bridge
[Building Environment Engineering]
- Countermeasure to the Chemical Pollutants from Housing Interior Building Materials
[Earthguake and Wind Engineering]
- 3D Sensor and Graphic Display System for Remote Control Construction
- Correlation between Damage States and Building Attributes at the 2000 Tottori-ken Seibu Earthquake
|